Zenith R49W36 - Manual (Page 35)

P A G E 3 5
206-03865
PIP (Picture-In-Picture) Options
Press PIP on the remote control with the
PIP image on the screen to activate POP
(Picture -out-of-Picture) mode.
The pictures of all the programmed chan-
nels are searched with the 3 PIP screen, as
shown right.
• By pressing SWAP, you can enlarge the
channel being searched on the PIP
screen to view it on the Main screen.
Press the EXIT button to exit POP mode.
1
2
POP (Picture-Out-of-Picture) Source
1
2
This is the function to search one-by-one the pictures of all
the programmed channels on the 3 PIP screen display while
the main screen remains the current channel.
POP is not available if you set lock “On” in Lock menu.
Press the SWAP button.
Each time you press the SWAP button, you switch the Main and PIP pictures.
Press the POSITION button in the PIP mode.
Each press of the POSITION button will move the sub picture to a different
position on the screen in a clock-wise direction.
Press the PIP button in the PIP mode.
Select the TV option on the PIP Source menu or with the PIP INPUT button. Use the
PIPCH-/PIPCH+ button to select a channel for the sub picture. Changing programs for the
sub picture is only possible when the 'TV' option is selected as PIP source (NTSC RF signal).
Main Picture Sub Picture
Run EZ Scan channel search before using POP mode.
Caption/Text is not available in POP mode.
Selecting PIP Channels
Swapping Screen
Moving the Sub Picture