Zenith R49W36 - Manual (Page 8)

P A G E 8 206-03865
Front Connection Panel (Video 3)
Video3 Panel
VIDEO
S-VIDEO
AUDIO
L/MONO
IN 3
R
There are four jacks on the right front side
behind the screen on your projection TV that
make connecting Audio/Video devices like
video games and camcorders very simple.
The jacks are like those found on the back
jack connection panel. This means that most
equipment that connects to those types of
jacks on the rear jackpack, may be connected
to the front connection panel (Video3).
To use the front jacks as the signal source,
select them using Main Source menu as
described on page 33. They will be named
“Video 3” in the Main Source menu.
Left/Right Audio
Used for stereo sound from various
types of equipment.
Video
Connects the video
signals from any
piece of equipment.
S-Video
A connection available on some very
high-end equipment that provides
better picture quality than video
input.
When you select Video3 (Front
Video or Front S-Video, the Front
audio) inputs are automatically
selected as well.
CAUTION: Do not connect to both Video and
S-Video at the same time. Connect
either Video or S-Video only.
Mini glossary
A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo
playback of videocassettes and for higher quality picture and sound from other A/V devices.
A/V DEVICE Any device that produces video (picture) and/or audio (sound) (VCR, DVD, cable box, or television).