Zenith R49W36 - Manual (Page 9)

P A G E 9
206-03865
ANT / Cable Service Hookup
1
Connect an antenna and/or cable service to
your TV as shown.
Turn to page 18 to do a channel search
with EZ Scan for ANT / CABLE
connection(s).
For best signal reception, it is recommended to have your Antenna professionally adjusted.
2
If you receive your RF signal
through an antenna that is several
years old and connects with two
small prongs, you will need to pur-
chase a 300 to 75 ohm adapter. It
should be available from your local
electronics dealer.
Zenith recommends using a 75
ohm cable for your antenna con-
nections in order to prevent
interference.
S-VIDEO
ANT/CABLE1
INPUT
ANT/CABLE2
INPUT
LOOP OUT
(R) (L) VIDEO
(MONO)
AUDIO
MNT
OUT
IN 2
IN 1
Antenna
Cable TV
Wall jack
RF coaxial wire
(75 ohm)
RF coaxial wire
(75 ohm)