Sys commands, 5 sys commands, 6 exit command – ZyXEL Communications ZyXEL DMA 1000 User Manual
Page 34: 1 info command, 2 set name command, 3 set contact command, 4 set location command
IES-1000 User’s Guide
5-4
System Commands
5.4.6 Exit
Command
Syntax:
192.168.1.1> exit
This command terminates the console or telnet management session.
5.5 Sys
Commands
5.5.1 Info
Command
Syntax:
192.168.1.1 sys> info
This command displays system related information.
5.5.2
Set Name Command
Syntax:
192.168.1.1 sys> set name <name>
This command allows you to set the name of your IES-1000. The previous setting will be cleared if the command
is entered with the <name> parameter omitted.
5.5.3
Set Contact Command
Syntax:
192.168.1.1 sys> set contact [<name>]
This command allows you to set the name of the contact person for your IES-1000. The previous setting will be
cleared if the command is entered with the name omitted.
5.5.4
Set Location Command
Syntax:
192.168.1.1 sys> set location [<name>]
This command allows you to set the location of your IES-1000. The previous setting will be cleared if the
command is entered with the location omitted.