Xerox 4512N - Manual (Page 12)

A s s e m b l i n g t h e P r i n t e r
10 ❖ S e t t i n g U p G u i d e
13 Insert a stack of paper into the tray so that the
stack fits under the two metal tabs at the inside
front corners of the tray. Do not overload the
tray.
The side of paper facing up gets printed.
14 If the paper does not fit within the preset
paper guides, adjust the guides so that they
rest against the stack of paper. Then insert the
tray into the printer.
Repeat steps 10-14 for the lower tray.
The lower tray will not feed paper unless
the upper tray is in place.