Xerox 4512N - Manual (Page 63)

U s i n g t h e C o n t r o l P a n e l
C h a p t e r 3 : T h e C o n t r o l P a n e l ❖ 3-13
Change the baud
rate setting.
Controls the rate at
which data is
transferred between
the computer and the
printer through the
optional serial
interface.
Choices:
300, 600, 1200, 2400,
4800, 9600, 19200,
38400, 57600
On Line Takes the printer off-line. Printing Menu
Menu Displays the Job Menu. Job Menu
Menu Displays the Config Menu. Config Menu
Menu Displays the Serial Menu (if present). Serial Menu
Item Displays the Baud Rate item. Baud Rate=X *
Up or
Down
Changes the baud rate setting. Baud Rate=N
Enter Saves the new value. Baud Rate=N *
On Line Returns the printer on-line. PCL 5e A4/A4
Change the data
bit setting.
Controls a
communications
parameter for the
optional serial
interface.
Choices:
8, 7
On Line Takes the printer off-line. Printing Menu
Menu Displays the Job Menu. Job Menu
Menu Displays the Config Menu. Config Menu
Menu Displays the Serial Menu (if present). Serial Menu
Item Displays the Baud Rate item. Baud Rate=X *
Item Displays the Data Bit item. Data Bit=X *
Up or
Down
Changes the data bit setting. Data Bit=N
Enter Saves the new value. Data Bit=N *
On Line Returns the printer on-line. PCL 5e A4/A4
Table 3.4 Using the Control Panel to set printer operation (continued)
Task
Key Press
Sequence
†
Action/Response Display Shows
Table 3.4 Page 6 of 9