Send rev send rev vcxrev vcxrev, Type type delay delay, Delay delay time time – Zoom MRS-1266 User Manual
Page 126
Reference [Effects]
ZOOM MRS-1266
126
2.
Turn the dial to select the new patch.
As you turn the dial, new patches will be recalled
immediately. If the track mixer REVERB SEND and
CHORUS/DELAY SEND parameter settings are raised, you
can press the PLAY [
R
] key to play back the song, and
listen to the result of the newly selected patch.
H
INT
• For details on track mixer operations, refer to p. 79.
• The lit/out status of the [REVERB] or [CHORUS/DELAY]
key shows the on/off status of that module. Each push of
the key toggles the status.
3.
To return to the main screen, press the [EXIT] key.
Editing a send/return effect patch
This section explains how to edit a send/return effect patch.
1.
Press the [EFFECT] key in the display section, and
then press the [REVERB] key or [CHORUS/DELAY]
key.
2.
If necessary, turn the dial to select the patch that
you want to edit. The following screen is an
example of the display indication when the
[CHORUS/DELAY] key was pressed.
3.
Press the [EDIT] key.
The display will indicate “EDIT”, and a screen will appear
in which you can edit the patch. When the [EDIT] key is
pressed, the effect type selected for that send/return effect is
shown.
4.
If you want to change the effect type, turn the dial.
When the effect type is changed, the effect parameters will
also change accordingly.
H
INT
If the contents of a patch have been edited, the “EDIT” indi-
cator in the upper part of the display will change to “EDIT-
ED”.
5.
Use the cursor up/down keys to select the effect
parameter that you want to edit.
The name and current value of the effect parameter are
shown on the second line of the display.
6.
Turn the dial to change the setting.
For details on the effect types that can be selected for reverb
or chorus/delay, and on the range of each effect parameter,
refer to the appendix (
→ p. 171) at the end of this manual.
7.
As necessary, repeat steps 5 - 6 to edit other effect
parameters.
8.
When you have finished editing, press the [EXIT]
key.
The unit returns to the patch select screen.
8
SEND REV
SEND REV
VcxRev
VcxRev
Patch number
Patch name
7
SEND CHO
SEND CHO
DeepCho
DeepCho
TYPE
TYPE
CHORUS
CHORUS
Effect type
TYPE
TYPE
DELAY
DELAY
2
2
DELAY
DELAY
TIME
TIME
Effect parameter