Zoom MRS-1266 - Manual (Page 39)

Reference [Recorder]
ZOOM MRS-1266
39
• GTRxx-yy
V-take recorded through GUITAR/BASS algorithm insert
effect
• MICxx-yy
V-take recorded through MIC algorithm insert effect
• LINxx-yy
V-take recorded through LINE algorithm insert effect
• MASxx-yy
V-take recorded through MASTERING algorithm insert
effect
• BYPxx-yy
V-take recorded without passing through an insert effect
• BOUxx-yy
V-take recorded using the bounce function
These names can be edited as required.
1.
From the main screen, press the [V-TAKE] key in
the track parameter section.
The [V-TAKE] key lights up, and the track number, V-take
number, and V-take name appear on the display.
N OTE
Only the name of the currently selected V-take of tracks 1 -
10 can be changed.
2.
Use the cursor left/right keys to select the track
whose V-take name you want to edit.
You can also select the track with the status keys (1 - 8, 9/10,
[MASTER]).
N OTE
If you select a V-take on which nothing is recorded, the
indication "NO DATA" appears and the name cannot be
edited.
3.
Press the [EDIT] key.
The first character of the V-take name flashes. This indicates
that you can change this character.
4.
Use the cursor left/right keys to move the flashing
position to the character you want to change.
5.
Turn the dial to select a character.
The following characters can be selected.
Numerals: 0 - 9
Letters: A - Z, a - z
Symbols: (space) ! " # $ % & ' ( ) + , - . / :
; < > = ? @ [ ] ^ _ ` { }
6.
Repeat steps 4 - 5 until the name is as desired.
7.
When you have finished editing the name, press
the [EXIT] key.
The new name is accepted and the unit returns to the
condition of step 2. If necessary, you can edit the names of
other V-takes.
8.
To return to the main screen, press the [EXIT] key.
The [V-TAKE] key goes out.
H INT
If a recorded V-take is erased, the name reverts to
"NO DATA".
TR 3- 2 TR 3- 2
GTR 3- 2
GTR 3- 2
TR 2- 1 TR 2- 1
GTR 2- 1
GTR 2- 1
TR 3- 2 TR 3- 2
GTR 3- 2
GTR 3- 2