Zoom MRS-1266 - Manual (Page 159)

Reference [Other Functions]
ZOOM MRS-1266
159
2.
To carry out the initialization process, press the
[ENTER] key once more
The all initialize process starts. When it is complete, the unit
returns to the condition of step 1.
Hard disk maintenance with the
accesory CD-ROM
A CD-ROM disc is attached to the MRS-1266. You can
execute the following mentainance of the hard disk.
■ Returning the entire hard disk to the factory default
condition (RECOVER)
Restore the entire hard disk to the default condition. All data
created by the user will be erased.
■ Factory Initialize (VER UP) (p.158)
1.
Insert the CD-ROM disc into the CD-R/RW drive,
and then push the [POWER] switch to turn the
MRS-1266 on.
2.
Use the cursor left/right key to select
"RECOVER?"(returning to the default) or "VER
UP?"(Factory Initialize), and press the [ENTER]
key.
Indication "Sure?" appears on the display.
3.
Press the [ENTER] key once more.
Either maintenance starts. When it is complete, indication
"Done" appears on the display. Eject the CD-ROM disc from
the drive, and turn the unit off and then turn it on again.
Init ALL Init ALL
SURE?
SURE?