Zoom MRS-1266 - Manual (Page 15)

Connections
ZOOM MRS-1266
15
R L
MIDI
IN
MIDI
OUT
OPTICAL IN
To prevent damage to the speakers of your audio system,
turn off the power of the system connected to the
[OUTPUT] (MASTER) jacks (or turn the volume all the
way down) before you make connections.
Loop the cable of the AC adaptor
around the hook as shown in the
diagram before connecting it to
the [DC 12V] jack. This will
prevent the plug from being
pulled out if the AC adaptor
cable is accidentally pulled.
When connecting stereo output
devices such as a synthesizer or
CD player, connect the L output
of the external device to the odd
jack, and the R output to the even
jack.
To supply +48V phantom power to a
condenser mic, set the [PHANTOM
ON/OFF] switch on the rear panel to
ON. (Phantom power will be supplied
to both INPUT 1/2 XLR connectors.
AC adaptor
Synthesizer or sampler, etc.
Audio system (audio components or amplified speakers)
Digital recorder
(e.g., DAT recorder or MD recorder)
Dynamic microphone or
condenser microphone
MIDI sequencer
(e.g., computer)
Rear panel
MIDI interface
Connections
Connect your instruments, audio devices, and MIDI devices as shown in the following diagram.