Xantrex Technology XDC 20-600 - Manual (Page 241)

S
C
PI C
o
mmand S
u
mmary
TM-XDOP-01XN
C
–17
Enter Analog
Voltage Readback
Output Data [:]CALibration[<channel>]:ANALog:
:{5V|10V}:READback:VOLTage[:DATA] <current>
Set analog readback voltage
calibration data No
Set Supply Output
Current Level [:]CALibration[<channel>]:OUTPut:CURRent:LEVel
{MINimum|MAXimum}
Set output current calibration
level No
Enter Output
Current Data [:]CALibration[<channel>]:OUTPut:CURRent[:DATA
] <current>
Set output current calibration data No
Set Supply Output
Voltage Level [:]CALibration[<channel>]:OUTPut:VOLTage:LEVel
{MINimum|MAXimum}
Set voltage output calibration
level No
Enter Output
Voltage Data [:]CALibration[<channel>]:OUTPut:VOLTage[:DATA
] <voltage>
Set voltage output calibration data No
Table C-6 Command to Clear all Protection Mechanisms
Function SCPI Command Description Query
Clear Output
Protection [:]OUTPut[<channel>]:PROTection:CLEar Clears the protection mechanism. N/A
Table C-5 Commands for Calibration
Function SCPI Command Description Query
TM-XDOP-01XN.book Page 17 Monday, July 17, 2006 11:19 AM