Xantrex Technology XDC 20-600 - Manual (Page 242)

SC
PI Co
mmand Re
fe
ren
ce
C–18
TM-XDOP-01XN
Table C-7 Commands for Fold Protection
Function SCPI Command Description Query
Set Output Fold
Delay [:]OUTPut[<channel>]:PROTection:FOLD:DELay
<delay>
Set the delay time (seconds)
before fold protection is triggered. Yes
Set Output Fold
Mode [:]OUTPut[<channel>]:PROTection:FOLD[:MODE]
{NONE|CC|CP|CV}
Select which regulation mode to
fold back (None, CV, CC, CP) Yes
Query Fold
Protection Tripped [:]OUTPut[<channel>]:PROTection:FOLD:TRIPped? Query if fold protection has
tripped N/A
Table C-8 Commands for Triggering
Function SCPI Command Description Query
Set Immediate
Initiation of Trigger
System [:]INITiate[<channel>][:IMMediate] Initiate a triggered event or
sequence N/A
Set Trigger Source [:]TRIGger[<channel>][:SEQuence]:SOURce
{BUS|EXTernal|IMMediate|NONE}
Sets the trigger source for
triggered setpoints Yes
TM-XDOP-01XN.book Page 18 Monday, July 17, 2006 11:19 AM