Installation precautions, Warning – Xantrex Technology 2500 User Manual

Page 22

Advertising
background image

90-0115-00
10/97 Fltman.pm65

INSTALLATION PRECAUTIONS

AC Output

Remote

Jack

AC Inputs

Chassis
Ground
Lug

CAUTION To reduce the risk of electric
shock and prevent premature failure due to
corrosion, do not mount where exposed
to rain or spray
.

CAUTION To prevent fire, do not obstruct
ventilation openings. Do not mount in a
zero clearance compartment, overheating
may result.

NOTICE The output of this device is not
sinusoidal
. It has a maximum total har-
monic distortion of 47% and a maximum
single harmonic of 34%.

CAUTION

Risk of electrical shock. Both

AC & DC voltage sources are terminated
inside this equipment.

Each circuit must

be individually opened before servicing.

CAUTION

Risk of electrical shock. Do

not remove cover, no user serviceable
parts inside.

Refer servicing to qualified

service personnel.

APPLICATION INFORMATION Provided
with

integral electronic protection

against AC & DC overloads.

CAUTION This equipment is not igni-
tion protected
and employs compo-
nents that tend to produce arcs or
sparks. To reduce the risk of fire or
explosions, do not install in compart-
ments containing batteries or flam-
mable materials
or areas in which
ignition-protected equipment is re-
quired.

For continued protection against risk of
electric shock, use only the ground-
fault circuit interrupter (GFCI) type
receptacles
detailed in this owner's
manual. Other types may fail to operate
properly when connected to this inverter,
resulting in a potential shock hazard.

WARNING

22

Fleet Power 2500 shown.

Advertising
This manual is related to the following products: