Xantrex Technology FREEDOM SW 3000 - Manual

TM
TM
Freedom SW 3000
Sine Wave Inverter/Charger
Owner’s Guide
FREEDOM
SW
3000 In ve rter
R eset Enable
Inv er ter AC /
On Cha rge Fa ult
Xanbus In ter fac e
FREEDOM
SW
3000
Inv er ter
R eset Enable
Inv erter AC/ On Cha rge Fa ult
Xanbus I nte rfa ce
Date of Manufacture
Serial Number
CAUTION:
To reduce the risk of fire, do not
cover or obstruc
t ventilation openings. Do not mount in a zero-clearance compartment. Overhea
ting may
result. Do not e
xpose to rain or spray.
INSTALLATION REQUIREMENTS: Mount this inv
erter/charger only in the orientations specified in the inst
allation g uide provided. WARNING:
Shock hazard. Do not open. No
user serviceable parts. Energized from both AC and
DC sources. Disconnect all
sources before servicing.
Use only ground-fault circuit interrupters (GFCI)
specified in the installation guide supplied. Other
types may fail to operate properly when connected to
this equipment. Refer to ma
nual. Charge only
lead-acid batteries. Other ba
ttery types may burst
causing personal injury and damage.
Nominal DC Operating Voltage:
12 Vdc
Nominal AC Output Voltage:
120 Vac , 1Ø
Nominal AC Output Frequency:
60 Hz
Max. Continuous AC Output Current:
25 A
Max. Operating DC Input Current:
320 A
Max. Continuous AC Output at Nominal DC
Input:
3000 VA at 25°C Max. Output Surge Power (5 s duration):
6000 VA
Max. DC Input Voltage:
16 Vdc
Max. Ambient Temperature:
50°C
Inverter Mode:
Nominal AC Input Voltage:
120 Vac , 60 Hz, 1Ø
Power Factor:
> 0.95 Charging DC Output Voltage Range:
5.0 - 16.0 Vdc
Max. Continuous Battery Charger DC Current at
Nominal AC Input:
150 A
Max. AC Input Current:
30 A per line Split Phase,
30 A per line Dual
Charger Mode:
3000W SINEWA
VE INVE RTER/CHARGER
FSW3000 815-3000
Model
Number FGA Number
FREEDOM SW 3000
Designed in Canada
Assembled in China
DANGER:
To reduce the risk of explosion, do not install in an area in
which igni tion-protected
euipment is requi
red.
UL 45 8 CS A 107.1 -01 3033614
FREEDOM
SW
3000
FREEDOM
SW
3000