Xantrex Technology FREEDOM SW 3000 - Manual (Page 24)

10 Freedom SW 3000 Owner’s Guide
Freedom SW 3000 Inverter/Charger Features
Supplied Accessories
NOTE: If any of the supplied accessories are missing, contact Xantrex or any
authorized Xantrex dealer for replacement. See “Contact Information” on
page i.
Figure 6 Supplied Accessories
3
1
4
2
Item Description
1 Two DC terminal covers are supplied to prevent
accidental contact with the DC cable connectors after
installation. The red cover is for the positive cabling
terminal, and the black cover is for the negative cabling
terminal.
2 BTS, the Battery Temperature Sensor consists of:
•
Connector plugs into the BTS jack on the Freedom
SW 3000.
• Sensor cable is 25 feet (7.6 meters).
• Sensor can be mounted on the side of the battery case
or on the negative battery terminal.
NOTE: The BTS continuously measures the temperature
of the battery and adjusts the charger output for a more
accurate, temperature-compensated charge.
3 Freedom Sine Wave remote panel (with 25-ft
communications cable) is functionally similar to the
Inverter Enable button on the unit’s front panel. It enables
and disables the Freedom SW 3000’s inverter mode
remotely. Connects to the REM jack on the Freedom SW
3000.
4 Two sets of nuts and washers are used to secure DC
cable ends to the DC terminals.