Xantrex Technology FREEDOM SW 3000 User Manual
Page 22
8
Freedom SW 3000 Owner’s Guide
Freedom SW 3000 Inverter/Charger Features
Figure 4 Isometric View of the Front Panel and AC/DC Side Panel
FREEDOM
SW
3000
Inverter
Reset Enable
Inverter AC/
On Charge Fault
Xanbus Interface
FREEDOM
SW
3000
Inv
er
ter
R
eset Enable
Inv
erter A
C/
On
Cha
rg
e F
au
lt
Xanbus In
te
rfa
ce
FREEDOM
SW
3000
3
1
4
2
5
6
7
8
Item Description
1
DC terminals. See “AC and DC Side Panels” on page 9
for more information.
2
AC wiring compartment access panel with
compartment cover on. See “AC and DC Side Panels” on
page 9 for more information.
3
Fault light illuminates if a fault condition occurs.
4
AC/Charge light illuminates when the Freedom SW
3000 is in charge mode and is producing DC output to
charge your batteries. AC/Charge also illuminates when
you are connected to an AC source like the utility grid or
a generator and the AC is qualified.
5
Inverter On indicates the unit is in invert mode.
NOTE: If AC is present and invert mode is enabled, this
light remains illuminated even though AC power is being
passed through.
6
Inverter Enable button is used to switch the inverter on
and off.
7
Reset button is used to clear any active faults if pressed
momentarily. If held down for more than three seconds,
the unit will reset (reboot) itself.
8
Xanbus Interface ports are used to connect Xanbus-
enabled devices including the optional SCP and AGS.