Xantrex Technology FREEDOM SW 3000 - Manual (Page 44)

30 Freedom SW 3000 Owner’s Guide
Configuration
Returning to Freedom SW 3000 Basic Menu
You can return to viewing the Freedom SW 3000 basic menu by selecting
Basic Menu from the Freedom SW 3000 advanced menu, as shown in
Figure 19. Advanced menu items will no longer be visible on the SCP.
Selecting and Adjusting the Configurable Settings
You can view or change Freedom SW 3000 settings from the Freedom SW
3000 menu. Status information is not configurable. Configurable settings
are indicated by square brackets [ ] and can be adjusted.
Follow these steps to change any Freedom SW 3000 setting.
1. On the Freedom SW 3000 menu, use the up arrow or down arrow
button to highlight the setting you want to change.
2. Press Enter to highlight the value of that Configurable setting,
indicated by square brackets [ ].
The previously set value appears with an asterisk beside it, as shown in
Figure 16.
3. Use the up arrow or down arrow button to change the value. Holding
down a button lets you scroll through values quickly.
4. Press Enter to select the value.
5. If you have another setting to change, return to step 1.
Or
If you have no more settings to change, press Exit to return to the
Select Device menu.
Selecting the Default Settings
All configurable items on the Freedom SW 3000 menu items have a default
setting. The default setting is the value which was set at the time the unit
was originally installed.
You can restore individual settings to their default value or you can restore
all values to default settings. See “Restore Default Warning Message” on
page 44.
Figure 19 Returning to Freedom SW 3000 Basic Menu
Clear Faults