Xantrex Technology FREEDOM SW 3000 - Manual (Page 19)

975-0545-01-01 5
Introduction
The Xanbus-enabled designation means that this product works on a
Xanbus network. Xanbus-enabled products are:
• Easy to use. The Xanbus network simplifies operation and automates
routine tasks.
• Reliable. Software control eliminates analog signalling errors.
• Accurate. Digital information is less susceptible to interference and
line loss.
• Upgradeable. Software upgrades mean your purchase will remain up
to date.
For detailed instructions and a complete list of Xanbus-enabled devices,
visit www.xantrex.com
Comprehensive Electronic Protection
Freedom SW 3000 is approved to meet a number of safety standards
including UL 458 and CSA C22.2 No. 107.1. See “Regulatory Approvals”
on page 63 for more information.
Freedom SW 3000 is equipped with numerous protection features to ensure
safe operation.
Protection feature This feature…
Battery over-voltage
protection Keeps the battery voltage from getting too
high in charge mode. Shuts the inverter off in
invert mode.
Battery under-voltage
protection Prevents inverter from discharging your
batteries too low. The inverter doesn’t run if
battery voltage is too low.
Over-temperature
protection Protects the unit from overheating by either
derating (charge mode) or by shutting down
(invert mode). See “Invert Power Derating
versus Ambient Temperature” on page 64.
Automatic overload
protection Protects the unit from excessive loads. The
unit will provide 6000 watts (twice the rated
load) for up to ten seconds, and then protect
itself by shutting down. See “Inverter
Specifications” on page 61 for more
information.
Short circuit protection Protects the unit by shutting it down.