Xantrex Technology FREEDOM SW 3000 - Manual (Page 63)

975-0545-01-01 49
Troubleshooting
Warning Messages
Only Battery Low warning exists for the FSW3000. This warning will be
recorded with a time stamp showing the date and time that the warning
appeared. The warnings have been recorded with a time stamp to let you
know the date and time that the warning appeared. See “Warning Types” on
page 46 for an explanation of automatic and manual warnings.
You can view the warning by selecting Warning Log from the Device Info
menu in the Freedom SW 3000 Advanced Menu.
To view a message from a warning list:
1. On the list, use the up arrow or down arrow button to highlight the
message you want to view.
2. Press Enter.
The complete message appears.
After viewing the message, you can return to the warning list by pressing
Exit or continue to the menu for the device that caused the fault by pressing
Enter. Each time you return to the list after viewing a complete message, the
viewed message is removed from the list.
If you have left the warning list, you can view them at any time from the
System Settings menu.
To view a fault list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List.
3. Press Enter.
Table 8 provides a detailed description of the warning message and
solution.
Table 8 Warning Message
Warning
Number
Message
Warning
Type
Cause Solution
W12 Battery
voltage is
getting low.
Recharge
battery. Automatic DC Under
Voltage
Warning Recharge
batteries and
check
battery
cables from
inverter to
batteries for
loose
connections.