Xantrex Technology FREEDOM SW 3000 - Manual (Page 42)

28 Freedom SW 3000 Owner’s Guide
Configuration
Selecting the Freedom SW 3000 from the Select
Device Menu
To select the Freedom SW 3000 from the Select Device menu:
1. With Freedom SW 3000 highlighted, press Enter.
The Freedom SW 3000 menu appears, as shown in Figure 16.
You can view and change Freedom SW 3000 settings from the device
menu. The number of settings on the Freedom SW 3000 menu will depend
on whether you have selected to view basic or advanced menus.
Selecting the Freedom SW 3000 Basic Menu
Freedom SW 3000 basic menu lists status information and settings you may
have to adjust on a routine basis. It provides access to basic control of the
inverter/charger.
Selecting the Freedom SW 3000 Advanced Menu
Freedom SW 3000 advanced menu lists status information and settings
which require that you understand and plan for the changes you make. You
may not have to adjust these settings as part of regular operation.
The SCP shows the Freedom SW 3000 basic menu by default. If you would
like to view the advanced menu, you must go to the System menu and select
Global Menus.
Figure 16 Menu in Invert Mode
Invert
[*Enabled]
IMPORTANT: When you set Global Menus to Advanced, the SCP will
display the advanced menus for all devices.To return to viewing the basic
menu for any Xanbus-enabled devices, select Basic Menu from the
advanced menu for that device