Xerox DocuColor 5000 - Manual (Page 50)

DocuColor 5000 Administrator Guide 2-20
2. System Settings
To switch
on
a feature, perform the following:
1.
From the System tab on the System Setting window, select
the NVM Read/Write button.
The NVM Read/Write window opens.
2.
Enter the desired
Chain Link Number
:
• The Chain Link Number for Special Media Setting for
Drilled Papers is
700 545
.
• The Chain Link Number for Special Media Setting for
LEF Tab Stock is
700 546
.
• The Chain Link Number for Carbonless Media
Enablement is
700-920
.
NOTE: For the purpose of this procedure, the following screens
show an example of a Chain Link Number, Current Value, and
New Value; this example does not represent an actual Chain Link
Number. The Current Value and New Value numbers will vary
depending on the Chain Link Number entered.