Xerox DocuColor 5000 - Manual (Page 97)

DocuColor 5000 Administrator Guide 3-39
3. Profiles
6
Percentage value: The number entered here represents the
percentage of toner area coverage on the originals.
NOTE: Print jobs that consist of multiple pages usually have a
variety of toner area coverage; therefore a range of toner area
coverage is provided by the machine. Usually the page (or pages)
that create the largest amount of curl will correlate with the largest
amount of toner coverage. This is the page (or pages) that you
will use in order to create a specific Decurler Profile.
Name
The Decurler Profile procedure you create/edit is based on the
Productivity Mode: either
Single Paper Weight
mode or
Mixed
Paper Weight
mode. For information on these productivity
modes, refer to page 2-10 of this guide.
1 Sided: Face Up
The values entered here are for output prints that are 1-sided,
face-up.
1 Sided: Face Down
The values entered here are for output prints that are 1-sided,
face-down.
2 Sided: Face Up
The values entered here are for output prints that are 2-sided,
face-up (N-1).
2 Sided: Face Down
The values entered here are for output prints that are 2-sided,
face-down (1-N).
2 Sided
The values entered here are for 2-sided output prints that are
jamming frequently in Areas 5, 6, 7a, and 7b of the digital press
and where paper curl is apparent.