Xerox DocuColor 5000 - Manual (Page 92)

DocuColor 5000 Administrator Guide 3-34
3. Profiles
Decurler settings A-D
The default Decurler settings for Type A through Type D are
shown in the following table. These settings are automatically
selected by the digital press.
NOTE: The settings in the above table were developed from
testing a wide range of paper samples, toner area coverages, and
environments. The outcome of this testing is the preset
parameters shown in the table, and these parameters refer to how
particular papers interact with the digital press decurling system.
If paper curl is a problem, using one of these preset parameters
usually eliminates the problem. However, due to the broad range
of paper variables, image coverage, and environmental factors,
these defaults settings may not result in satisfactory performance.
All Trays
Paper Weights
Paper Types
Western
Hemisphere
Paper Type
Eastern
Hemisphere
Paper Type
60 - 80 g/m 2 Coated
Uncoated
A
A
B
B
81 - 105 g/m 2 Coated
Uncoated
B
D
B
D
106 - 135 g/m
2 Coated
Uncoated
A
B
A
B
136 - 186 g/m 2 Coated
Uncoated
A
A
A
A
187 - 220 g/m 2 Coated
Uncoated
A
A
A
A
221 - 300 g/m 2 Coated
Uncoated
A
A
A
A