ZyXEL Communications PLA-400 - Manual (Page 36)

Chapter 4 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
36
Figure 22 Adding a New Adapter
3 Select your adapter by selecting Local and type the network password for your existing
network in the Network Password (NMK) field (C).
Figure 23 Adding an Adapter to an Existing Network
4 Click Save and click OK on the pop-up.
Figure 24 Network Password Pop-up
5 Your new adapter will now have the same Network Password (NMK) as your existing
network and so has now joined your existing network.
6 Connect the adapter to the device you want to add to the network, for example, your
Internet refrigerator in the kitchen.
7 Plug the adapter’s power cord into a power outlet and, if required, switch the power
outlet on.
8 Repeat this procedure for all additional powerline adapters that you want to add to your
existing or new powerline network.
A B
C