ZyXEL Communications PLA-400 - Manual (Page 39)

Chapter 4 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
39
Figure 27 Local/Remote Adapters on a Powerline Network
3 To set up a new powerline network, type the DAK Password and change the Network
Password (NMK) on all powerline adapters you wish to add to your network.
• Look for the DAK Password on a label on your powerline adapter. The DAK
Password lets you access the adapter.
• Select the Remote adapter you want to add (A) and type the DAK Password in
the DAK Password field (B).
• Then type the new network password in the Network Password (NMK) field.
Figure 28 Adding an Adapter to Your New Network
4 Click Save.
• If you do not type the DAK password or type it incorrectly either of the following pop-
ups appears. Click OK and type the DAK Password correctly in the DAK Password
field.
B
A