Product specifications, Appendix a product specifications, Table 9 hardware specifications – ZyXEL Communications PLA-400 User Manual
Page 51: For speeds currently supported, Appendix a on, Product specifications (51)
PLA-4xx Series User’s Guide
51
A
P P E N D I X
A
Product Specifications
The following tables summarize the PLA-4xx’s hardware and firmware features.
Table 9 Hardware Specifications
Dimensions (W x D x H) PLA-400/402
112 (L) mm x 106 (D) mm x 28.5 (H) mm
PLA-470
162 (L) mm x 118 (D) mm x 40 (H) mm
Power Input
100 - 240 VAC, 50/60 Hz, 0.12 A
Ethernet Port
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
Operation Environment
Temperature: 0º C ~ 45º C
Humidity: 5% ~ 95% Noncondensing
Storage Environment
Temperature: -10º C ~ 70º C
Humidity: 10% ~ 85% Noncondensing
Cabling Type
PLA-400/402/470
1 x Power Cord
PLA-400/402
1 x LAN UTP Category 5 or Better
PLA-402
1 x Coaxial Cable
PLA-470
4 x LAN UTP Category 5 or Better
Network Interface
PLA-400/401/402/470
1 x 200 Mbps Powerline port compliant with HomePlug AV standard
PLA-400/401/402
1 x 10/100M BASE-T Ethernet port with Auto MDI/MDIX
PLA-470
4 x 10/100 M Base-T Ethernet Ports with Auto MDI/MDIX
PLA-402
1 x Coaxial Cable Port
Distance between the
centers of the holes on
the device’s back.
PLA-400/402
74 mm
PLA-470
1150 mm
Recommended type of
screws for wall-mounting
PLA-400/402/470
M3 Tap Screw