ZyXEL Communications PLA-400 - Manual (Page 40)

Chapter 4 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
40
Figure 29 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 30 Correct DAK
5 The settings for the adapter will now grey out and the adapter will disappear from the
table next time you start up the configurator.
Figure 31 An Adapter on Your New Network
6 Go back to step 3 to set the same, new Network Password (NMK) for all remote
adapters you want to add to your new network.
7 Check you have added the adapters correctly by changing the password for the local
adapter. All adapters with the new Network Password (NMK) now appear in the list of
adapters on your network. These adapters are now part of your new network.