ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 157)

Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
157
Figure 88 VoIP > Phone > DECT Phone
Each field is described in the following table.
Table 70 VoIP > Phone > DECT Phone
LABEL DESCRIPTION
DECT Port
Settings
Select the DECT phone you want to see in this screen. If you change this field, the
screen automatically refreshes.
Outgoing Call Use If you select multiple SIP accounts, the ZyXEL Device tries to use the most
recently registered SIP account first.
SIP1 - SIP10 Select the checkbox of the SIP account you want to use when making outgoing
calls with your DECT phone.
Incoming Call
apply to
If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
SIP1 - SIP10 Select the checkbox of the SIP account if you want to receive phone calls for the
selected SIP account on your DECT phone.
PSTN Line Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on your DECT phones. (P-2302HWUDL-P1 model only)
Base Station
Update
Register PIN
Code
Select this to update the PIN code of the DECT phone. The default PIN code is
1234. If you are changing the PIN code for the first time, enter 1234 in the Old PIN
Code field.
Note: When the PIN code changes, phones already registered
with the ZyXEL Device will have to re-register when they
are turned off and turned on again.
Old PIN Code Enter the existing PIN code. The PIN code can be from 1 to 4 digits long and is
limited to numbers 0 to 9.
New PIN
Code
Enter the new PIN code. The PIN code is 1 to 4 digits long and is limited to
numbers 0 to 9.
Retype to
Confirm
Retype the new PIN code.