Table 14 connection wizard > ip address (ethernet) – ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Page 57

Advertising
background image

Chapter 3 Wizard Setup

P-2302HWUDL-P1 Series User’s Guide

57

The following table describes the labels in this screen.

3.2.6.2 PPPoE

"

You cannot use the

Connection Wizard

if the PPPoE remote server cannot be

discovered automatically.

Table 14 Connection Wizard > IP Address (Ethernet)

LABEL

DESCRIPTION

My WAN IP

Address

Enter the IP address provided by your ISP.

My WAN IP

Subnet Mask

Enter the subnet mask provided by your ISP.

Gateway IP

Address

Enter the gateway provided by your ISP. If your ISP did not provide one, leave it

blank.

DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice

versa. The DNS server is extremely important because without it, you must know the IP address of a

computer before you can access it. The ZyXEL Device uses a system DNS server (in the order you

specify here) to resolve domain names for VPN, DDNS and the time server.

First DNS Server
Second DNS

Server
Third DNS Server

Enter the IP addresses of the DNS servers.
If you have only one DNS server, enter its IP address in the First DNS Server field

and leave the remaining fields at default.

< Back

Click this to go to the previous screen.

Next >

Click this to go to the next screen.

Exit

Click this to close this screen and return to the main screen.

Advertising