ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 174)

Chapter 13 VoIP Trunking
P-2302HWUDL-P1 Series User’s Guide
174
Figure 100 VoIP > Trunking > Peer Call
Each field is described in the following table.
Table 82 VoIP > Trunking > Peer Call
LABEL DESCRIPTION
Outgoing
Authentication
You need to set up accounts for the peer devices you use in VoIP trunking. This is
the IP address of the remote peer device, as well as the username and password
needed to authenticate with the remote peer device.
# This is an index number of your outgoing authentication accounts.
Name Enter a descriptive name for the remote peer device of this account. For example,
if the peer device is located in London, you might enter London as the account
name. This name is used when you configure call rules in the VoIP > Trunking >
Call Rules screen.
Username Enter the username needed to authenticate at the remote peer device. The
remote peer device must have the same username in an incoming authentication
entry in order to authenticate your connection. Enter up to 32 alphanumeric
characters.