ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 214)

Chapter 17 Bandwidth MGMT
P-2302HWUDL-P1 Series User’s Guide
214
17.2.3 Bandwidth Class Edit Screen
Use this screen to configure a bandwidth management class.
"
For each interface, you must enable bandwidth management before you can
configure classes.
To access this screen, click Add Sub-Class in Management > Bandwidth MGMT > Class
Setup.
Figure 125 Management > Bandwidth MGMT > Class Setup > Edit
See Appendix G on page 347 for examples of services for which you might create bandwidth
classes. Each field is described in the following table.
Table 100 Management > Bandwidth MGMT > Class Setup > Edit
LABEL DESCRIPTION
This section lets you set the budget and priority for this class.
Class Name Finish the auto-generated name, or enter a descriptive name up to 20
alphanumeric characters long. Spaces are allowed.
Bandwidth Budget Enter the maximum bandwidth for the class, in kbps. The recommendation is 20 -
20000 kbps for each class.
Priority Enter the priority of this class. The higher the number, the higher the priority. Legal
values are 0 - 7. The default setting is 3.