XM Satellite Radio SA10085 - Manual (Page 16)

16
Section 4
Auto-On
Once you have installed your Roady2 and the power has been turned on
using the power button , you will discover your Roady2 has been factory-
set to be turned off and back on again using the ignition key in your vehicle.
To change this factory-set condition and always power your Roady2 on and
off with the power button , select the “Auto-On” feature in the menu and
then select “Off.”
Auto-Off
You can set your radio to automatically shut off 60, 120, or 180 minutes after
it is turned on. This feature should be used if your vehicle continues to power
the cigarette lighter/auxiliary power after you remove your key, so if you leave
it on, Roady2 will shut down automatically after the time period you select and
will not drain your battery. At home, this can be used as a “sleep” feature to
turn Roady2 off automatically after a period of time.
Factory Default
This feature lets you restore your Roady2 to the same settings as when you
purchased it. It will erase the presets, TuneSelect, memory, and stock ticker
data stored and reset the other features to the configuration when you first
purchased Roady2.
Warning: When using this product it is always important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury to you or to others or in property damage.