Philips HP8560 - Manual (Page 12)

9 Press the START/STOP button to switch on the tanning lamps or the infrared lamps (Fig. 14).
Note: It can take a few seconds for the lamps to go on. This is normal.
10 A flashing dot appears on the display next to the time. (Fig. 15)
The countdown of the set tanning or relax time starts.
last minute
The appliance beeps during the last minute of the session.
During the last minute, you can repeat the set time. Press the repeat button ( ä). (Fig. 16)
Note: The display shows the set time and starts to count down. The appliance stops beeping.
During the last minute, you can set a new time. Turn the time-selection ring to the desired time
(1) and then press the START/STOP button (2). (Fig. 17)
Note: By setting a new time, you can avoid the 3-minute waiting time which is necessary to let the
tanning lamps cool down after they have switched off. This 3-minute waiting time does not apply to the
infrared lamps.
During the last minute of the tanning or relax session, you can press the SNOOZE button to
enjoy the warmth of the infrared lamps for 9 more minutes. You can press the SNOOZE button
as often as you like. (Fig. 18)
adjusting functions
The function selection button shows the different functions. (Fig. 19)
1 Press the function selection button to switch from function to function. (Fig. 20)
The symbol that turns yellow shows the function you have selected.
 Choose:
symbol ¥ if you want to tan your whole body
symbol ¼ if you want to tan a specific part of your body*
symbol ‚ if you want to relax
symbol × if you want to warm up a part of your body*
* One side of the lamp unit goes on.
setting the time for a tanning or relax session.
1 Consult the chapters ‘Tanning and your health’ and ‘Relaxation and your health’ for the
correct tanning or relax time.
 Turn the time-selection ring to set the time of the tanning or relax session (Fig. 21).
Turn the ring clockwise to increase the time and turn it anticlockwise to decrease the time.
interrupting the tanning or relax session
To interrupt a tanning session, press the pause button ( ã). (Fig. 22)
The lamps go out. The cool-down time of 3 minutes flashes on the display and counts down. During
these 3 minutes, the lamps cool down. When the time has counted down to 0 and stops flashing,
you can switch the appliance back on. Press the START/STOP button or the pause button ( ã) to
start the countdown of the remaining session time.
To interrupt a relax session, press the pause button ( ã). (Fig. 23)
The lamps are switched off and the pause symbol and the remaining time appear on the display. The
waiting time does not apply to the infrared lamps, so you can switch the appliance back on
whenever you want. Press the STOP/START button or the pause button ( ã) to start the
countdown of the remaining time.
changing the tanning or relax time during a session
To change the set time during a tanning session, press the START/STOP button (Fig. 24).
The lamps are switched off. Set a new time with the time-selection ring. Wait until the set time stops
flashing (this takes 3 minutes because the lamps have to cool down first). Then press the START/
-
-
-
,
-
-
-
-
-
-
-
EnglisH 1