Configuring a filter set, 2 configuring a filter set – ZyXEL Communications Prestige 314 PLUS User Manual

Page 110

Advertising

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch

7-4

Filter Configuration

You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter set
having up to six rules, you can have a maximum of 24 rules active for a single port.

7.2 Configuring a Filter Set

To configure a filter set, follow the procedure below. Select option 21 from the main menu to display menu
21.

Step 1.

Enter 1 to display the following menu.

Figure 7-3 Menu 21 — Filter Set Configuration

Step 2.

Select the filter set you wish to configure (no. 1-12) and press [ENTER]

Step 3.

Enter a descriptive name or comment in the Edit Comments field and press [ENTER].

Step 4.

Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.1.1 — Filter Rules
Summary.

Menu 21 - Filter Set Configuration

Filter

Set #

------
1

Comments

------------------
NetBIOS_WAN

NetBIOS_LAN

TEL_FTP_WEB_WAN

______________

Filter

Set #

------
7

Comments

------------------
______________

______________

Enter Filter Set Number to Configure= 0

Edit Comments=

Press ENTER to CONFIRM or ESC to CANCEL:

Advertising