ZyXEL Communications Prestige 314 PLUS - Manual (Page 129)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
UPnP 8-3
Figure 8-1 Configuring UPnP
Table 8-1 Configuring UPnP
FIELD DESCRIPTION
Enable the Universal Plug
and Play (UPnP) feature Select this checkbox to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without entering
the Prestige's IP address (although you must still enter the password to
access the web configurator).
Allow users to make
configuration changes
through UPnP Select this check box to allow UPnP-enabled applications to automatically
configure the Prestige so that they can communicate through the Prestige, for
example by using NAT Transversal, UPnP applications automatically reserve
a NAT forwarding port in order to communicate with another UPnP enabled
device; this eliminates the need to manually configure port forwarding for the
UPnP enabled application.
UPNP Name This identifies the ZyXEL device in UPnP applications.
Apply Click Apply to save the setting to the Prestige.
Reset Click Reset to begin configuring this screen afresh.