XM Satellite Radio XMC10 - Manual (Page 12)

12
CAUTION: Do not install the swivel bracket on a leather or
fabric surface, or in a position that could impair
your vision, block air bag(s) or obstruct vehicle
dashboard controls and/or radio CD/cassette
operational displays.
NOTE: The adhesive backing on the bracket will not permit
easy repositioning once it has been mated to the
surface; use extreme care and planning when
selecting the mounting location. If the bracket is to be
screwed to the surface, make sure the area in back of
the mounting surface is clear of wires or other items to
prevent unintentional damage.
c. Using the alcohol swab supplied with your kit, clean the mounting
surface and thoroughly wipe the area dry with a clean lint-free
cloth.
d. If the outside air temperature is cold, it may be beneficial to
warm the adhesive backing on the bracket using a portable hair
dryer, or by holding the backing surface in front of a vehicle
heater vent.