XM Satellite Radio XMC10 - Manual (Page 15)

15
3. Using Other Manufacturer’s Mounts
The XMC10 Cradle can also be installed using other manufacturer’s
mounts; the mounting plate provisions on the rear and bottom of
thecradle provide you with two mounting options within the vehicle
using various vehicle-specific aftermarket brackets.
4. Installing the Xpress XM ® Receiver into the Cradle
Install the Receiver as follows:
a. After making sure the connectors and guide pin hole are properly
lined up, gently lower the Xpress XM ® Receiver into the cradle
and press down on the Xpress XM ® Receiver to mate the
connectors together. The raised detent on the cradle will enter
the notch on the rear of the Receiver, indicating the Xpress XM
®
is properly seated.
b. The Xpress XM ® Receiver should now be secured in the
cradle