XM Satellite Radio XMC10 - Manual (Page 13)

13
NOTE: Allow a 72-hour period for the adhesive backing to cure
completely.
e. Remove the plastic liner from the adhesive backing on the
bracket, and fix the base in position on the surface; make sure
the mounting pad is accurately positioned on the first try, since
repositioning may be difficult, if not impossible.
f. If the bracket is to be screwed in place, do not remove the plastic
liner from the adhesive backing. Use appropriate sheet metal
or machine screws for this purpose.
g. To mount the XMC10 cradle atop the swivel bracket, line up
the slot at the rear of the cradle with the bracket retainer tab,
and slide the cradle down so that the slot and tab mesh together
in a locked position.