XM Satellite Radio XMC10 - Manual (Page 17)

17
5. Connection Options
The Xpress Receiver and Cradle provide an audio output signal
in three ways:
a. FM Wireless Transmitter - When using the XMC10 cradle
with the wireless FM transmitter option, the XM audio signal
can be received through your vehicle radio on selectable FM
frequencies using the menu options included in your Xpress
Receiver. (Refer to the Receiver owner’s manual.) The XM
audio signal can then be played through your vehicle radio
when the car radio is tuned to one of the available
frequencies.
b. FM Direct Wiring - If the FM wireless transmitter does not
provide satisfactory performance in your vehicle, use the
optional FM Direct Adapter, Part # XMFM-1, which provides a
hard-wired FM output.
c. Low-Level Audio Output - For vehicles equipped with radio
head units with auxiliary audio inputs, the audio signal can
be routed through an optional audio cable (Part No. SAT-
RCA) and applied to the auxiliary inputs of a radio or
entertainment system. In this case, it is best to turn the
Xpress Receiver FM modulator option off to avoid
interference.