Xantrex Technology power Inverter Stacking - Manual (Page 5)

975-0059-01-01 Rev A iii
About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and procedures
for installing the Inverter Stacking Control – Series Cable and provides
information regarding stacking two identical Sine Wave Plus inverters.
Scope
The Guide provides safety guidelines, detailed planning and setup information for
stacking inverters, and procedures for installing the ISC-S cable .
Audience
The Guide is intended for anyone who needs to install series-stacked, Sine Wave
Plus inverters using the Inverter Stacking Control – Series Cable . Installers should
be certified technicians or electricians.
Organization
This Guide is organized into three chapters.
Chapter 1, “Introduction” provides information on stacking of Sine Wave Plus
inverters.
Chapter 2, “Installation” provides information on installing the DC wiring, AC
Wiring, and the ISC-S for Sine Wave Plus inverters.
Chapter 3, “Operation”contains information on startup and functional testing
procedures for series-stacked Sine Wave Plus inverters.
Warranty and Product Information is provided at the end of the Guide.