ZTE F152 - Manual (Page 13)

13
1.2 Insert the Battery
Remove the back cover by pressing gently and sliding down. Insert the battery carefully with
the contacts located against the gold springs. The battery will only fit one way.
Close the case by locating the plastic cover into the grooves and sliding the cover up to
close it. Do NOT force the cover down by pressing on it. This will damage the cover. Slide the
cover up gently
Notes
•
The battery is not fully charged when you buy your phone but there may be enough power in
the battery to turn the phone on.
•
The battery takes two or three charge cycles to reach full capacity.