Zoom PS-02 - Manual (Page 2)

2
Safety Precautions
Safety
Pr
ecautions
About power
• Since power consumption of this unit is
fairly high, we recommend the use of an
AC adapter whenever possible. When
powering the unit from a battery, use
only an alkaline type.
AC adapter operation
• Be sure to use only an AC adapter which
supplies 9 V DC, 300 mA and is
equipped with a "center minus" plug
(Zoom AD-0006). The use of an adapter
other than the specified type may damage
the unit and pose a safety hazard.
• Connect the AC adapter only to an AC
outlet that supplies the rated voltage
required by the adapter.
• When disconnecting the AC adapter from
the AC outlet, always grasp the adapter
itself and do not pull at the cable.
• If the unit is not to be used for a long
time, disconnect the AC adapter from the
outlet.
Battery operation
• Use four IEC R03 AAA 1.5 V batteries
(alkaline/manganese).
• The PS-02 cannot be used for recharging.
Pay close attention to the labelling of the
battery to make sure you choose the
correct type.
• If the PS-02 is not to be used for an
extended period of time, remove the
battery from the unit.
• If batteries leakage has occurred, wipe
the battery compartment and the battery
terminals carefully to remove all
remnants of battery fluid.
• While using the unit, the battery
compartment cover should be closed.
Environment
Avoid using your PS-02 in environments
where it will be exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
• Since the PS-02 is a precision electronic
device, avoid applying excessive force to
the controls. Do not operate the keys or
controls with your foot.
• Take care that no foreign objects (coins
or pins etc.) or liquids can enter the unit.
• Be sure to turn the power to all
equipment off before making
connections.
• Before moving the unit, turn the power
off, and disconnect all cables and the AC
adapter.
Alterations
Never open the case of the PS-02 or attempt
to modify the product in any way since this
can result in damage to the unit.
Warning
This symbol indicates explanations about extremely dangerous matters.
If users ignore this symbol and handle the device the wrong way, serious
injury or death could result.
Caution
This symbol indicates explanations about dangerous matters. If users
ignore this symbol and handle the device the wrong way, bodily injury
and damage to the equipment could result.
In this manual, symbols are used to highlight warnings and cautions for you to read so that
accidents can be prevented. The meanings of these symbols are as follows:
Please observe the following safety tips and precautions to ensure hazard-free use of the PS-02.
Warning
Caution
Caution
Caution