Zoom PS-02 - Manual (Page 36)

36
Operation
Guide
After the recording of audio tracks is completed, you can put the
finishing touches on the song, such as adjusting the balance of rhythm
track and audio tracks.
You can adjust the volume level of the drums and bass played on the
rhythm track as follows.
1.
Use the cursor [ ]/[ ] keys to cause the RHYTHM menu
LED to light up.
The display switches to the Rhythm menu.
2.
Press the [ ] key.
The rhythm track of the song and audio tracks 1 - 3 are played back.
3.
Using sliders 2 and 3, adjust the drum/bass level of the
rhythm track.
The bar graph in the lower part of the display shows the approximate
level balance.
When playing the song while the Rhythm menu is displayed, slider 1 adjusts
the level of the input signal.
You can adjust the level balance and panning (stereo position) of audio
tracks 1 - 3 as follows.
◆
Adjusting the level of each audio track
1.
Use the cursor [ ]/[ ] keys to cause the AUDIO menu
LED to light up.
Adjusting the audio track level balance and panning
Adjusting the rhythm track level balance
Finish up the song
PATTERN CHORD RECORD MIXDOWN