Zoom PS-02 - Manual (Page 45)

45
(4) [ ] key
Starts/pauses song playback (rhythm track + audio tracks).
While the song is paused ([ ] key is flashing), you can use the cursor [ ]
([ ]) key to change the current position. Pressing the [ ] key then starts
playback from the new position.
(5) [REC] key
Pressing the [REC] key while the song is stopped calls up the pattern
input display for programming the rhythm track.
For details on programming the rhythm track, see the Operation Guide,
pages 18 - 26.
(6) [VIEW] key
Pressing this key during song playback cycles the display through the
following functions: Chord name
➝ Tempo ➝ Pattern name (Form
only)
➝ Rhythm menu.
(7) [MIC] key
Activates the built-in microphone. (The signal from the [INPUT] jack
is muted.) This key is only active when the "
" (mic icon) is
shown for the selected patch.
(8) Cursor [ ]/[ ] keys
Serve to switch the menu.
(9) Cursor [ ]/[ ] keys
Move the play position in the current song backward or forward, in
units of 1 measure.
(10)[EXIT (CANCEL)] key
Switch the mode in the order Rhythm Edit menu
➝ Rhythm menu ➝
Song Menu.
(11)[BYPASS] key
Bypasses (mutes) effect processing.
(12)[EDIT] key
Activates the Rhythm Edit menu (
➝ page 46).
(13)Patch [
▲]/[▼] keys
Serve to switch effect patch numbers (user patches 1 - 60
➝ preset
patches 1 - 60). Shortly after switching the patch, the display reverts
to the Rhythm menu.
Refer
e
nce
Guide