Zoom ST-224 - Manual (Page 43)

To turn the effect off again, press the [EFFECT ON/OFF] key once
more.
When a MIDI message is used to turn an effect on, the effect will
stay on until turned off by another MIDI message.
The [EDIT 1] wheel and [EDIT 2] knob can be used to edit effect
parameters, and they also serve as real-time effect controllers during
pad or sequencer playback. Which parameters are adjusted by the
[EDIT 1] wheel and [EDIT 2] knob depends on the currently selected
effect type ( ➔ p. 46 ).
HINT HINT
43
Using
the
Internal
Effects
Pad
EDIT 2
EDIT 1
[EDIT 1]
wheel
[EDIT 2]
knob
To turn the effect on permanently, hold down the [LOOP/MARK] pad and press the
[EFFECT ON/OFF] key.
4 STEP
Operate the [EDIT 1] wheel and [EDIT 2] knob while hitting the pad for which effect
processing has been enabled.
5 STEP
ON/OFF
LOOP/MARK
+
[LOOP/MARK] pad