Zoom ST-224 - Manual (Page 58)

• To terminate resampling when one-shot playback of pad is
completed
Press the [PAD FUNCTION] key so that the [PAD FUNCTION] LED
lights up.
• To terminate resampling when playback of song is completed
Press the [SONG FUNCTION] key so that the [SONG FUNCTION]
LED lights up.
The indication "rEAdy" appears on the display.
Resampling starts as soon as the [SONG PLAY/STOP] key or one of
pads 1 - 8 is pressed.
Resampling can be carried out while combining song playback and
pad play, and while varying effect parameters in real time.
The new sample is assigned to the selected pad. (Detail of Assigning
a Sample to a Pad ➔ p. 27 )
HINT HINT
58
Using
the
Resampling
Function
RECORD
PLAY/STOP
BANK 1
BANK 1– 3 keys
Pads 1 – 8
PAD ASSIGN
BPM/VALUE
MEASURE SAMPLE/SONG BEAT
SONG
PLAY/STOP REC
Pads 1 – 8
Press the [RECORD] key again.
7 STEP
To resample a song, press the [SONG PLAY/STOP] key. To resample pad play, hit one of
pads 1 - 8.
8 STEP
To manually terminate resampling, press the [PLAY/STOP] key. 9 STEP
If desired, use the [PLAY/STOP] key to check the sample. 10 STEP
Press the [PAD ASSIGN] key twice. 11 STEP
Use the [BANK 1] - [BANK 3] keys and the pads 1 - 8 to select the pad to which you want
to assign the sample.
12 STEP
Press the [PAD ASSIGN] key again.
13 STEP
PAD ASSIGN