Connections (continued) basic tv connections, Rf coaxial connection, Video connection – Zenith XBS341 User Manual

Page 12: S-video connection, Component video (color stream, Connection, Progressive scan (colorstream, Pro) connection, Vs r rear of tv rear of dvd+hi-fi vcr

Advertising
background image

12

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on
the capabilities of your existing equipment.

RF coaxial connection

Connect the ANTENNA/CABLE OUT jack on the
DVD+Hi-Fi VCR to the ANTENNA in jack on the TV
using the 75-ohm Coaxial Cable supplied (R).

ote

If you use this connection, tune the TV to the DVD+Hi-
Fi VCR’s RF output channel (CH 3 or 4).

How to set the DVD+Hi-Fi VCR’s RF output channel
1.
While the DVD+Hi-Fi VCR is turned off, press and hold

TUNING (v/V) on the front panel for about five
seconds.

The unit will turn itself on and “RF-03” or “RF-04” appears in
the display window.

2. Use TUNING (v/V) on the front panel to change the

RF output channel (CH 03 or CH 04).

3. Turn the DVD+Hi-Fi VCR off and then on.
4. Select the TV’s CH to 3 or 4 depending on the RF

output channel you had selected.
Now you can watch the DVD+Hi-Fi VCR playback on
CH3 or CH4 of your TV.

Video connection

Connect the MONITOR OUT jack on the DVD+Hi-Fi
VCR to the VIDEO IN jack on the TV using the video
cable supplied (V).

otes

If you use this connection, set the TV’s source selector to
VIDEO.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+Hi-Fi VCR
to the S-VIDEO IN jack on the TV using the optional S-
Video cable (S).

Component Video (Color Stream

®

) connection

Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using a Y Pb Pr cable (C).

Progressive Scan (ColorStream

®

pro) connection

If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD+Hi-Fi
VCR’s progressive scan output for the highest video
resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+Hi-Fi VCR.

Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using an optional Y Pb Pr cable (C).

ote

– Set the Progressive option to “On” in the Setup menu

for a progressive signal, see page 20.

ANTENNA

FM

GND

AM

S-VIDEO OUT

IN

OUT

ANTENNA/CABLE

SPEAKERS

FRONT

(R 4 )

(R 4 )

REAR

CENTER

( 4 )

REAR

(L 4 )

FRONT

(L 4 )

SUB

WOOFER

( 8 )

VIDEO

MONITOR COMPONENT

VIDEO OUT

OUT

VIDEO

Y

Pb

Pr

AUDIO

1

L

R

L

R

AUDIO INPUT

VIDEO

INPUT

ANTENNA

INPUT

V

S

R

Rear of TV

Rear of DVD+Hi-Fi VCR

S-VIDEO

INPUT

Y

Pb

Pr

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

C

Advertising