Zenith XBS341 - Manual (Page 36)

36
Speaker Setup
Adjust the Speaker Setup menu option settings for the
built-in 5.1 channel surround decoder. (Also refer to
page 14, Speaker Positioning.)
11 Select “5.1 Speaker Setup” on the Setup menu
using the 3
3/4 4 buttons.
2 2 While “5.1 Speaker Setup” is selected, press 2
button.
3 3 Use 2 2 button to select the desired speaker.
4 4 Adjust options by using 3 34 41 1 2 2 buttons.
Speaker Selection
Select a speaker that you want to set up. ((Front speak-
ers (Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
ote
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Use 1 1 / 2 2 to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
Size
Speaker size settings are fixed, you cannot change the
settings.
Distance
If you connected speakers to your DVD+Hi-Fi VCR,
specify the Distance from each speaker to the listener,
you want to make the sound from each speaker reach
the listener at the same time. (1 ft = 30.48 cm)
ote
You can not set the distance of subwoofer speaker.
Test
Press MEMORY/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of test
signals memorized in the system.
Front Left (L) → Front Right (R) → Center →
Rear Left (L) → Rear Right (R) → Subwoofer
Return
Press MEMORY/ENTER to return to the previous menu.
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
R R
Front L
Volume 0 dB
Size Small
Distance 1 ft
Test
Return