Zenith XBS341 - Manual (Page 27)

OPERA
TION
27
VCR Operation (Continued)
VHS Hi-Fi Stereo System/
MTS Broadcast
This DVD+Hi-Fi VCR is equipped with the VHS Hi-Fi
audio sound system for recording and playback. The
information below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
11 Set the AUDIO MODE option to Hi-Fi on the
SETUP menu .
2 2 Set the AUDIO OUTPUT option to STEREO
position.
(STEREO) POSITION: The left channel sound (L) is
heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard
from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
3 3 Press MENU.
4 4 Insert a cassette and press PLAY ( B ).
Adjust volume at your stereo system.
MTS (Multi-Channel TV Sound)
This DVD+Hi-Fi VCR will decode MTS stereo and bilin-
gual (SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies,
as long as they operate on assigned cable frequencies
and use the EIA-recommended MTS stereo/bilingual TV
sound system.
Multichannel TV Sound Indicator (MTS)
Shows onscreen as illustrated below when MEMORY/
ENTER is pressed.
One or both of the indicators will light, depending on the
MTS broadcast.
If only STEREO appears on the TV screen.
The DVD+Hi-Fi VCR can record in stereo onto the VHS Hi-Fi
audio tracks when the BROADCAST TYPE option is in the
STEREO position. The DVD+Hi-Fi VCR will also record mono
audio onto the mono audio track.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
11 Insert a video cassette with the anti erasure
safety tab intact.
2 2 Set the BROADCAST TYPE option to SAP
(SETUP menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
3 3 Press MENU.
4 4 Select the desired recording speed (SP or SLP)
with SPEED.
5 5 Select the desired channel. SAP should appear
on the TV screen.
6 6 Press REC/ITR (z z) once
You are now recording the program you see and hear on the
TV.
77 Press STOP (x x) twice to stop recording.
STEREO
Lights up when a stereo broadcast
is being received.
SAP
Lights up when a SAP BILINGUAL
broadcast is being received.
TV screen
CH 4
STEREO/SAP