Zenith XBS341 - Manual (Page 40)

40
Troubleshooting (Continued)
Symptom
Some channels are
skipped over when
using CH/TRK (v/V)
Picture and sound of
broadcasting channel
are weak or missing.
Camcorder image is not
shown.
Camcorder image via
A/V input to DVD+Hi-Fi
VCR is not shown on
TV screen.
Timer recording is not
possible.
indicator appears
after DVD+Hi-Fi VCR is
turned off.
Stereo Audio Record
and/or Playback is not
present.
Cause
Those channels were deleted with the
CH. ADD/DEL option.
Antenna or cables are loose.
Wrong TUNING BAND option is being
used.
Camcorder is off.
DVD+Hi-Fi VCR SOURCE SELECT is
not set to LINE1 or LINE2.
Clock in DVD+Hi-Fi VCR is not set to
correct time.
Timer has been programmed
incorrectly.
indicator does not appear after pro-
gramming timer.
DVD+Hi-Fi VCR is in Timer Recording
mode.
TV is not Stereo-compatible.
Broadcast program is not in stereo for-
mat.
DVD+Hi-Fi VCR BROADCAST TYPE
mode is set to SAP or MONO.
Correction
Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 17.
Tighten connections or replace cable.
Try all TUNING BAND options. See
“Channel Selection” on page 17 for
details.
Turn camcorder on and operate
properly.
Use INPUT to select LINE input
source (LINE1 or LINE2).
Set clock to correct time. See “Setting
the Clock” on page 18.
Reprogram Timer. See “Timer
Recording” on pages 24 and 25.
Reprogram Timer.
This is the normal indication that the
DVD+Hi-Fi VCR is in TIMER mode.
No action is possible.
No action is possible.
Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR Setup
Menu” on page 17.
Moisture Condensation
Moisture condensation can occur:
• When the DVD+Hi-Fi VCR is moved from a cold
place to a warm place.
• Under extremely humid conditions.
In locations where moisture condensation may occur:
• Keep the DVD+Hi-Fi VCR plugged into an AC power
outlet with POWER On. This will help prevent conden-
sation.
• When condensation has occurred, wait a few hours
for the DVD+Hi-Fi VCR to dry before using it.